Introduction of Metal Mask Products

Area	Name	Usage, Specs
Metal Mask	YesMask-TypeND	High-spec use. E.g. Bump molding
Metal Mask	YesMask-TypeNB-01	Additive Metal Mask for precision printing
Metal Mask	YesMask-TypeNB-02	Additive Metal Mask for dot printed touch panel

Metal Mask product information

(Scale: mm)

Type ND	Symbol	Design rule	Applied range
Y-coat process	－	0.0002≦0.0005	Print surface
Thickness & Accuracy	Ｔｍ	Within ±10％ of spec	0.045≦Tm≦0.150
Hole size & Accuracy	Ｗｐ	Within ±5％ of spec	0.045≦Wp≦0.300
Pitch accuracy	△Ｄｐ	-0.01≦△Dp≦+0.01	0<Dp≦100
		-0.02≦△Dp≦+0.02	100<Dp≦250
		-0.03≦△Dp≦+0.03	250<Dp≦450
Angle	Wp/Ws	0.85≦Wp/Ws≦0.95	0.045≦Tm≦0.150 0.045≦Wp≦0.300
	Wp-Ws	0.045≦Wp-Ws≦0.01
Aspect ratio	Tm/Wp	Tm/Wp≦1.0
Metal size	－	650ｘ650	－

TypeNB-01	Symbol	Design rule	Applied range
Y-coat process	－	Non	Non
Thickness & Accuracy	Tm	Within±10% of spec	0.020≦Tm≦0.050
Hole size & Accuracy	Wｐ	Within ±0.005 of spec	0.020≦Wp≦0.100
Pitch accuracy	ΔDp	Within ±0.1% of spec （When spec. is 2mm, gap will be less than 0.002mm)	1＜Dp≦5
			100＜Dp≦250
			250＜Dp≦450
Aspect ratio	Tm/Wp	Tm/Wp≦1.0	0.020≦Tm≦0.500
Metal size	－	650×650	－

TypeNB-02	Symbol	Design rule	Applied range
Y-coat process	－	Non	Non
Thickness & Accuracy	Tm	Within±10% of spec	0.020≦Tm≦0.050
Hole size & Accuracy	Wｐ	Within ±0.005 of spec	0.020≦Wp≦0.100
Pitch accuracy	ΔDp	Within ±0.1% of spec （When spec. is 2mm, gap will be less than 0.002mm)	1＜Dp≦5
			100＜Dp≦250
			250＜Dp≦450
Metal size Max. 650×650
Aspect ratio	Tm/Wp	Tm/Wp≦1.5	0.040≦Tm≦0.070
Metal size Max. 690×710
Aspect ratio	Tm/Wp	Tm/Wp≦1.0	0.030≦Tm≦0.500

---

FAQs on Metal Mask products. See FAQ

More detail on our products. please contact us. Contact us

Page top